The MEGASTATION are complete “turnkey” for the conversion of energy produced by large PV installation into electricity feed into the MV distribution grid. Thanks to the flexibility of the different sizes of power and the ease of connection and commissioning they provide fast installation extremely quick and rapid.

The MEGASTATION are available in five power size: 500-1000-1200-1500-1800-2250-2720-3000 kWp. They are able to maximize the efficiency and performance of your solar park thanks to the use of central inverters FIMER R series with modular
architecture of power (Modular Power System, patented by FIMER). Using the modular inverters FIMER within MEGASTATION it is allowed not only to maximize the efficiency and performance of the system, but also it reduces the downtime and the service is extremely rapid and available to restore easily the malfunction occurred to your conversion station.
The Modular Power System gives therefore the absolute certainty the production of energy. Partializing the full power of each inverter, even in case of failure, your solar installation will never stop producing energy. Another power converter module will think to exploit and compensate for the production.


  • Flexibility and scalability configuration.
  • A wide and complete range of power
  • Manufactured and tested directly in factory to reduce installation time and avoid the assembly in plant
  • Maximum efficiency and energy production thanks to inverter with MPS architecture.
  • Differentiadted management of the photovoltaic generator and optimization in sub-field
  • Designed in usch a weay as to be easily serviced periodically due to the easy accessibility of all installed devices.

The high quality of our MEGASTATION, already in production for several years, is the synthesis is given by the use of high quality materials assembled by very specialized personnel. They are made in compliance with the international standards of safety, accident prevention and environmental protection and are built using a container designed and manufactured to maintain its structural integrity and weather characteristic in a temperature range from -30 º C to 50 º C during both the transport and after its installation and wiring in the PV plant. The container structure are of standard size (20 feet / 6 meters or 40 feet/12 meters) for easy transportation and handling at our factory at also in your installation. Inside the cabin is insulated by affixing panels made in a thermally insulating material and the ventilation and the temperature control is implemented and by using a fan system act to ensure the maintenance of an ambient temperature inside the installation within the limits required by the various equipment installed inside the cabin. The entrance and the exit of air takes place through suitable rainproof and anti-mouse grids, distributed peripherally so as to cool the apparatus in an appropriate and uniform mode. Access to the cabin is through doors properly sized to allow passage of the equipment installed inside and the doors are equipped, where necessary, with panic handles and security locks.



Apparent power AC: 690 kVA
MV operating Voltage: 40.5 kV
MPPT Voltage range: 445-820V



Apparent power AC: 1.380 kVA
MV operating Voltage: 140.5 kV
MPPT Voltage range: 445-820V



Apparent power AC: 2.070 kVA
MV operating Voltage: 40.5 kV
MPPT Voltage range: 445-820V



Apparent power AC: 2.760 kVA
MV operating Voltage: 40.5 kV
MPPT Voltage range: 445-820V