Welding power source MIG MAG standard a 3Ph 220A
APPLICATIONS
Building sites, medium-heavy carpentry, blacksmith, agriculture.
MATERIALS
Unalloyed steel, Low-alloy steel, Alloy steel, Stainless steeel, Copper Alloys, Aluminium alloys.
FOCUS
15 kg inthernal Spool.
AVAILABLE
4 Rolls
FACTORY CONFIGURATION
- 2 rolls wire-feeder motor
- Rolls 0.6/0.8
- Carton box
| | Data Sheet |
Supply voltage | | 3x400V |
Output range | | 25 A - 220 A |
Duty Cycle | 35% | 220 A |
| 60% | 160 A |
| 100% | 115 A |
Open circuit voltage | | 15.25 ÷ 25 VDC |
Frequency | | 50 / 60 Hz |
Mains fuses (delayed action) | | 10 A |
Max. connected power | | 4.0 kW |
Recommended generator rating | | 6.8 kW |
Cos j | | 0.9 |
Protection classification | | IP 21 s |
Insulation class | | F |
Adjustement range | | 11 step |
Rolls | | 2 |
Wire speed | | 2 ÷ 20 m/min |
Torch connection | | Euro |
Dinse | | 25 mm2 |
Weight | | 61 Kg |
Dimensions (WxLxH) | | 330x900x820 mm |
Wire | Ø | 0.6 - 1.0 |
Features | | |
Pre gas/post gas | | - |
Soft start | | * |
Burn back | | * |
Display | | - |
6S4.230.352 | TM 230 |
049.600.060 | Cable with earth clamp 16 mm2 - dinse 25 mm2 - 3 m |
049.600.054 | Cable with earth clamp 25 mm2 - dinse 25 mm2 - 3 m |
043.600.141 | Torch F25 - 3 m - 200A@60% |
043.600.142 | Torch F25 - 4 m - 200A@60% |
280.500.004 | Gas regulator 2 manometers macro CO2/Argon |
| Rolls |
422.500.303 | Roll 0,6-0,8 D.30 - V groove (steel, stainless steel) |
422.500.312 | Roll 0,8-1,0 D.30 - V groove (steel, stainless steel) |
422.500.304 | Roll 1,0-1,2 D.30 - V groove (steel, stainless steel) |
422.500.314 | Roll 1,2-1,6 D.30 - V groove (steel, stainless steel) |
422.500.309 | Roll 0,8-1,0 D.30 - U groove (aluminium) |
422.500.316 | Roll 1,0-1,2 D.30 - U groove (aluminium) |
422.500.310 | Roll 1,2-1,6 D.30 - U groove (aluminium) |
422.500.317 | Roll 1,0-1,2 D.30 - Knurled groove (flux cored) |
422.500.315 | Roll 1,2-1,6 D.30 - Knurled groove (flux cored) |